Legendary Tones Mr Scary Mod Deep Gain George Lynch Tube Gain Module Reverse Wire
Legendary Tones

Legendary Tones Mr Scary Mod Deep Gain George Lynch Tube Gain Module Reverse Wire

  • Product SKU: Mr Scary Mod Reverse

Price Match Guarantee details

Easy Returns details

Note: This item does not qualify for free shipping.

Buy Online, Pick up In-Store details

Have a question about this product?
We're here to help
Call us (888) 900-1959
Text us (415) 457-7600
Email | More options
Available: In Stock

$319.00 $319.99

 

No credit needed with acima creditMore info

Legendary Tones Mr Scary Mod Deep Gain George Lynch Tube Gain Module Reverse Wire

Created in collaboration with George Lynch, the Mr. Scary Mod is a custom-modified version of the Hot Mod V2. Want to supercharge your classic Marshall amp with more gain without applying a permanent modification? Then read more below and welcome to the Mr. Scary Mod!

George tried the original Hot Mod V2 (HMV2) in his Marshall and enjoyed it, so we decided to collaborate and do a custom-voiced version specifically for him. So instead of the HMV2’s two-position Hot Switch for two pre-set gain stages, we’ve added a gain knob that goes from unity gain all the way to scorching hot on the Mr. Scary Mod. And just like the original HMV2, all the clarity and low-noise characteristics have been retained. We also added a Deep switch to help provide a bass boost when desired or when using a guitar that might otherwise be a little thin. With the Deep switch off, low end is tightened and it serves as a slight bass cut for clarity.

Originally released as the Lynch Mod in February 2021, the updated Mr. Scary Mod features the same circuit as the Lynch Mod but is now equipped with a tube mix combo of 12AT7/12AX7 per George’s preference as well as a facelift in a newly redesigned electro-galvanized steel enclosure. As with the Lynch Mod, each run will be limited and this first run in Pumpkin Orange with Black hardware is limited to just 150 pieces worldwide.

The Mr. Scary Mod adds an adjustable 100% pure tube gain stage on top of the cathode follower V2 position, keeping note definition and articulation while further increasing sustain. Each Mr. Scary mod is meticulously built and wired by hand in the USA, one at a time, and tuned using high-grade components. Equipped with a single ECC81 (12AT7) in the first position and ECC83 (12AX7) in the second, the Mr. Scary Mod can clean up beautifully when rolling down your guitar’s volume, and still adds scorching gain when you roll it back up. This is a gain stage that’s been tuned and approved by the ears of the maestro George Lynch himself and is incredibly dynamic and touch-responsive.

“The Mr. Scary Mod excels with dynamics and is incredibly touch-responsive, allowing me to shift from playing clear, lightly compressed cleans to full-out aggressive sustain and distortion – and control it all simply by varying my guitar’s volume control and picking,” said George Lynch. “In many ways, it’s an old-school approach, but it’s also so much more natural and expressive in addition to being musically fulfilling when you can play both the guitar and amp dynamically together this way.”

JCM 800 800 2203X reissue (all years), 2203ZW (Zakk Wylde signature)

1987X (model year 2003+ w/Marshall added effects loop)

1959SLP (w/Marshall added effects loop),

1959RR (Randy Rhoads Signature)

NOTES ON OTHER AMPS

CLONES:The Hot Mod V2 has been found to work well in a variety of Marshall 1959/1987/2203/2204 clone and similar circuits including: Ceriatone, Germino, Mojotone, Wangs, and Bugera (Bugera requires a reverse wired HMV2E model and is compatible with pre-Infinium 1960 model only. Bugera Infinium 1960 will NOT work properly).  If your clone amp is based on a 2203/2204 design and has any squealing/oscillation noise when using it with the HMV2/Lynch Mod, it is likely because the amp doesn’t use shielded wire on pin 7 of V1 like Marshall amps use on their 2203/2204 designs from 1979+. This would be a good update to perform on the clone amp, regardless of the use of the HMV2/Lynch Mod or not as Pin 7 of V1 tends to be sensitive.

FRIEDMAN AMPS:Runt 50 is compatible with the reverse-wire version of the Hot Mod V2 Evo and Lynch Mods (use in V3 position of Runt 50). The Small Box and BE-100 are also compatible but require use of standard wired HMV2E or Lynch Mod.

NOTE: Friedman amps are NOT compatible with earlier “pre-EVO” Hot Mod V2 units.

NOTE 2: While the Runt 20, JJ Jr. and Pink Taco 20 models are sonically compatible with the HMV2E and Lynch Mod, the head enclosures are too shallow and don’t have enough depth to fit the HMV2E chassis.

OTHER AMPS:The Hot Mod V2 is designed to work with amps which use a cathode follower design into the tone stack. It adds a gain stage essentially on top of the cathode follower. As a result, the HMV2 will function in other classic amps like Fender Pro, Super, Twin, etc. as well as others like Vox AC30 or certain Traynor amps, etc. However, the circuit of the HMV2 has been tuned and optimized for Marshall circuits, so we generally recommend they be used for the models in the list above only. If we were to make a design for a Fender for example, it would be tuned differently just like it would also be tuned differently for a Vox.

Popular amps that the HMV2/Lynch Mod DO NOT WORK with include: Marshall Silver Jubilee series, Marshall Origin series, Marshall DSL/TSL series, Mesa Boogie amps, and Hiwatt. 

NEW and updated for 2021! Introducing the LegendaryTones HOT MOD V2 EVO, a plug-in dual tube module specifically engineered to dramatically increase gain in Marshall amps. The HOT MOD V2 EVO requires NO chassis cutting, drilled holes, or wiring modifications to your amp – it simply and easily installs in place of the middle V2 tube position. The circuit within harnesses the power of an additional gain stage now running an additional tube.

Want your classic Marshall to sing with increased sustain and pure vacuum tube tone? Your tube high-gain solution is here. No solid state tricks or clipping diodes. 100% pure tube gain. The HOT MOD V2 EVO circuit was carefully designed to give you gradual increases of gain when using the amp’s preamp control. From adding a touch of sweet sustain, to full on metal, your Marshall will now have greater flexibility and deliver a wider range of tones.

With the HOT MOD V2 EVO (HMV2E), because the increased gain is created inside the amp rather than through an external pedal booster running in front of the input, the noise level of the HMV2E is dramatically reduced even at higher gain settings compared to when using an overdrive or EQ pedal used as a clean boost. Additionally, because of the HMV2E design focus was articulation with sustain, your signal can still clean up well by rolling back your guitar’s volume control. And if for some reason you still wanted more gain from an external pedal to shape or increase the signal gain further, you can still do it. You likely won’t need to, but go ahead and hit the front end of your amp with a hotter signal and the HMV2E will take it just fine!

The Marshall JMP and JCM 800 series amps from the 1970s and 1980s are legendary. And back in the day, they were getting hot rodded in numerous ways and indeed were a fantastic platform to work from. The quality of the transformers and components used in those classic amps was unparalleled. Sad to say that it’s true that they don’t make them like they used to. Now you can get many of the same high-gain Marshall tones with the simple and easy-to-use HMV2E. With the quality build and components (transformers, capacitors) found in those original early Marshall JMP and JCM 800 series amps and pure tube signal and tone that’s straight-forward and organic, the HMV2E is a great way to modernize and get the most out of your amp.

The onboard Bass boost/cut switch is a customer request for those players who wanted to have a tighter low end. In the down position, the note articulation stays tight. When in the up position, a nice range of low-end resonance.

The 2-stage Gain switch gives high-gain boosts in both positions. In the down position it has more note clarity and attack, in the up position, even more sustain and compression. The down position is based on the tuning of the original Hot Mod V2.

NEW and updated for 2021! Introducing the LegendaryTones HOT MOD V2 EVO, a plug-in dual tube module specifically engineered to dramatically increase gain in Marshall amps. The HOT MOD V2 EVO requires NO chassis cutting, drilled holes, or wiring modifications to your amp – it simply and easily installs in place of the middle V2 tube position. The circuit within harnesses the power of an additional gain stage now running an additional tube.

Want your classic Marshall to sing with increased sustain and pure vacuum tube tone? Your tube high-gain solution is here. No solid state tricks or clipping diodes. 100% pure tube gain. The HOT MOD V2 EVO circuit was carefully designed to give you gradual increases of gain when using the amp’s preamp control. From adding a touch of sweet sustain, to full on metal, your Marshall will now have greater flexibility and deliver a wider range of tones.

With the HOT MOD V2 EVO (HMV2E), because the increased gain is created inside the amp rather than through an external pedal booster running in front of the input, the noise level of the HMV2E is dramatically reduced even at higher gain settings compared to when using an overdrive or EQ pedal used as a clean boost. Additionally, because of the HMV2E design focus was articulation with sustain, your signal can still clean up well by rolling back your guitar’s volume control. And if for some reason you still wanted more gain from an external pedal to shape or increase the signal gain further, you can still do it. You likely won’t need to, but go ahead and hit the front end of your amp with a hotter signal and the HMV2E will take it just fine!

The Marshall JMP and JCM 800 series amps from the 1970s and 1980s are legendary. And back in the day, they were getting hot rodded in numerous ways and indeed were a fantastic platform to work from. The quality of the transformers and components used in those classic amps was unparalleled. Sad to say that it’s true that they don’t make them like they used to. Now you can get many of the same high-gain Marshall tones with the simple and easy-to-use HMV2E. With the quality build and components (transformers, capacitors) found in those original early Marshall JMP and JCM 800 series amps and pure tube signal and tone that’s straight-forward and organic, the HMV2E is a great way to modernize and get the most out of your amp.

Now, there’s no need to cut up or drill into your classic amps and reduce their value. The HMV2E is a simple plug-in device that injects more gain and FUN into your Marshall! Isn’t that what it’s all about?

Legendary Tones Mr Scary Mod Deep Gain George Lynch Tube Gain Module Reverse Wire

Created in collaboration with George Lynch, the Mr. Scary Mod is a custom-modified version of the Hot Mod V2. Want to supercharge your classic Marshall amp with more gain without applying a permanent modification? Then read more below and welcome to the Mr. Scary Mod!

George tried the original Hot Mod V2 (HMV2) in his Marshall and enjoyed it, so we decided to collaborate and do a custom-voiced version specifically for him. So instead of the HMV2’s two-position Hot Switch for two pre-set gain stages, we’ve added a gain knob that goes from unity gain all the way to scorching hot on the Mr. Scary Mod. And just like the original HMV2, all the clarity and low-noise characteristics have been retained. We also added a Deep switch to help provide a bass boost when desired or when using a guitar that might otherwise be a little thin. With the Deep switch off, low end is tightened and it serves as a slight bass cut for clarity.

Originally released as the Lynch Mod in February 2021, the updated Mr. Scary Mod features the same circuit as the Lynch Mod but is now equipped with a tube mix combo of 12AT7/12AX7 per George’s preference as well as a facelift in a newly redesigned electro-galvanized steel enclosure. As with the Lynch Mod, each run will be limited and this first run in Pumpkin Orange with Black hardware is limited to just 150 pieces worldwide.

The Mr. Scary Mod adds an adjustable 100% pure tube gain stage on top of the cathode follower V2 position, keeping note definition and articulation while further increasing sustain. Each Mr. Scary mod is meticulously built and wired by hand in the USA, one at a time, and tuned using high-grade components. Equipped with a single ECC81 (12AT7) in the first position and ECC83 (12AX7) in the second, the Mr. Scary Mod can clean up beautifully when rolling down your guitar’s volume, and still adds scorching gain when you roll it back up. This is a gain stage that’s been tuned and approved by the ears of the maestro George Lynch himself and is incredibly dynamic and touch-responsive.

“The Mr. Scary Mod excels with dynamics and is incredibly touch-responsive, allowing me to shift from playing clear, lightly compressed cleans to full-out aggressive sustain and distortion – and control it all simply by varying my guitar’s volume control and picking,” said George Lynch. “In many ways, it’s an old-school approach, but it’s also so much more natural and expressive in addition to being musically fulfilling when you can play both the guitar and amp dynamically together this way.”

JCM 800 800 2203X reissue (all years), 2203ZW (Zakk Wylde signature)

1987X (model year 2003+ w/Marshall added effects loop)

1959SLP (w/Marshall added effects loop),

1959RR (Randy Rhoads Signature)

NOTES ON OTHER AMPS

CLONES:The Hot Mod V2 has been found to work well in a variety of Marshall 1959/1987/2203/2204 clone and similar circuits including: Ceriatone, Germino, Mojotone, Wangs, and Bugera (Bugera requires a reverse wired HMV2E model and is compatible with pre-Infinium 1960 model only. Bugera Infinium 1960 will NOT work properly).  If your clone amp is based on a 2203/2204 design and has any squealing/oscillation noise when using it with the HMV2/Lynch Mod, it is likely because the amp doesn’t use shielded wire on pin 7 of V1 like Marshall amps use on their 2203/2204 designs from 1979+. This would be a good update to perform on the clone amp, regardless of the use of the HMV2/Lynch Mod or not as Pin 7 of V1 tends to be sensitive.

FRIEDMAN AMPS:Runt 50 is compatible with the reverse-wire version of the Hot Mod V2 Evo and Lynch Mods (use in V3 position of Runt 50). The Small Box and BE-100 are also compatible but require use of standard wired HMV2E or Lynch Mod.

NOTE: Friedman amps are NOT compatible with earlier “pre-EVO” Hot Mod V2 units.

NOTE 2: While the Runt 20, JJ Jr. and Pink Taco 20 models are sonically compatible with the HMV2E and Lynch Mod, the head enclosures are too shallow and don’t have enough depth to fit the HMV2E chassis.

OTHER AMPS:The Hot Mod V2 is designed to work with amps which use a cathode follower design into the tone stack. It adds a gain stage essentially on top of the cathode follower. As a result, the HMV2 will function in other classic amps like Fender Pro, Super, Twin, etc. as well as others like Vox AC30 or certain Traynor amps, etc. However, the circuit of the HMV2 has been tuned and optimized for Marshall circuits, so we generally recommend they be used for the models in the list above only. If we were to make a design for a Fender for example, it would be tuned differently just like it would also be tuned differently for a Vox.

Popular amps that the HMV2/Lynch Mod DO NOT WORK with include: Marshall Silver Jubilee series, Marshall Origin series, Marshall DSL/TSL series, Mesa Boogie amps, and Hiwatt. 

NEW and updated for 2021! Introducing the LegendaryTones HOT MOD V2 EVO, a plug-in dual tube module specifically engineered to dramatically increase gain in Marshall amps. The HOT MOD V2 EVO requires NO chassis cutting, drilled holes, or wiring modifications to your amp – it simply and easily installs in place of the middle V2 tube position. The circuit within harnesses the power of an additional gain stage now running an additional tube.

Want your classic Marshall to sing with increased sustain and pure vacuum tube tone? Your tube high-gain solution is here. No solid state tricks or clipping diodes. 100% pure tube gain. The HOT MOD V2 EVO circuit was carefully designed to give you gradual increases of gain when using the amp’s preamp control. From adding a touch of sweet sustain, to full on metal, your Marshall will now have greater flexibility and deliver a wider range of tones.

With the HOT MOD V2 EVO (HMV2E), because the increased gain is created inside the amp rather than through an external pedal booster running in front of the input, the noise level of the HMV2E is dramatically reduced even at higher gain settings compared to when using an overdrive or EQ pedal used as a clean boost. Additionally, because of the HMV2E design focus was articulation with sustain, your signal can still clean up well by rolling back your guitar’s volume control. And if for some reason you still wanted more gain from an external pedal to shape or increase the signal gain further, you can still do it. You likely won’t need to, but go ahead and hit the front end of your amp with a hotter signal and the HMV2E will take it just fine!

The Marshall JMP and JCM 800 series amps from the 1970s and 1980s are legendary. And back in the day, they were getting hot rodded in numerous ways and indeed were a fantastic platform to work from. The quality of the transformers and components used in those classic amps was unparalleled. Sad to say that it’s true that they don’t make them like they used to. Now you can get many of the same high-gain Marshall tones with the simple and easy-to-use HMV2E. With the quality build and components (transformers, capacitors) found in those original early Marshall JMP and JCM 800 series amps and pure tube signal and tone that’s straight-forward and organic, the HMV2E is a great way to modernize and get the most out of your amp.

The onboard Bass boost/cut switch is a customer request for those players who wanted to have a tighter low end. In the down position, the note articulation stays tight. When in the up position, a nice range of low-end resonance.

The 2-stage Gain switch gives high-gain boosts in both positions. In the down position it has more note clarity and attack, in the up position, even more sustain and compression. The down position is based on the tuning of the original Hot Mod V2.

NEW and updated for 2021! Introducing the LegendaryTones HOT MOD V2 EVO, a plug-in dual tube module specifically engineered to dramatically increase gain in Marshall amps. The HOT MOD V2 EVO requires NO chassis cutting, drilled holes, or wiring modifications to your amp – it simply and easily installs in place of the middle V2 tube position. The circuit within harnesses the power of an additional gain stage now running an additional tube.

Want your classic Marshall to sing with increased sustain and pure vacuum tube tone? Your tube high-gain solution is here. No solid state tricks or clipping diodes. 100% pure tube gain. The HOT MOD V2 EVO circuit was carefully designed to give you gradual increases of gain when using the amp’s preamp control. From adding a touch of sweet sustain, to full on metal, your Marshall will now have greater flexibility and deliver a wider range of tones.

With the HOT MOD V2 EVO (HMV2E), because the increased gain is created inside the amp rather than through an external pedal booster running in front of the input, the noise level of the HMV2E is dramatically reduced even at higher gain settings compared to when using an overdrive or EQ pedal used as a clean boost. Additionally, because of the HMV2E design focus was articulation with sustain, your signal can still clean up well by rolling back your guitar’s volume control. And if for some reason you still wanted more gain from an external pedal to shape or increase the signal gain further, you can still do it. You likely won’t need to, but go ahead and hit the front end of your amp with a hotter signal and the HMV2E will take it just fine!

The Marshall JMP and JCM 800 series amps from the 1970s and 1980s are legendary. And back in the day, they were getting hot rodded in numerous ways and indeed were a fantastic platform to work from. The quality of the transformers and components used in those classic amps was unparalleled. Sad to say that it’s true that they don’t make them like they used to. Now you can get many of the same high-gain Marshall tones with the simple and easy-to-use HMV2E. With the quality build and components (transformers, capacitors) found in those original early Marshall JMP and JCM 800 series amps and pure tube signal and tone that’s straight-forward and organic, the HMV2E is a great way to modernize and get the most out of your amp.

Now, there’s no need to cut up or drill into your classic amps and reduce their value. The HMV2E is a simple plug-in device that injects more gain and FUN into your Marshall! Isn’t that what it’s all about?

Returns

  • Any New item (other than as noted below) purchased from Bananas at Large may be returned within 14 days of the invoice date, for a full refund, exchange or credit.
  • All Pre-Owned products may be returned in 48 hours.
  • All Clearance, “additional mark down”, additionally discounted, “blow out”, “door buster” or otherwise identified as on sale may be returned within 7 days unless otherwise specified.

For online orders, the above return policy begins on the day the items were delivered. We must receive an active tracking number within the specified time.

Bananas must be notified within 24 hours of receiving delivery of any issues that pertain to damage during shipping, missing product or incorrect product.

See our full Return Policy for all of the pertinent details.

Shipping

We understand that when you make an order, you want your gear as quickly as possible and we'll do our best to make that happen! Most of the items we sell will ship quickly and be at your door fast. In most cases, orders ship within 1-3 business days. Shipping and delivery dates are not guaranteed unless otherwise specified. 

Most orders $100 and over qualify for FREE shipping within the Continental United States. Some exclusions may apply.

See our full Shipping Policy for further details.

Buy online, pick up in store

Order online and pick up at any store location FREE of charge. Avoid online shipping charges and shipping time, and in most cases get your order faster. Enjoy the in store pickup convenience and security of knowing that your can easily return the product if it does not suit your needs within our return policy.

I'm interested! What do I need to do?

  1. Place your order on bananas.com and choose In-Store Pickup for your preferred location at checkout.
  2. We'll contact you by email or phone when it's ready for pick up. Need it sooner? Just give us a call and we'll do our best to arrange that: 888-900-1959
  3. Bring a copy of your valid government-issued ID such as a Driver's License and a digital or print copy of the order confirmation to your local store.
  4. You have (2 options): Curbside Contactless Pickup or Pick up in Store.
    1. Curbside Contactless Pickup: When you arrive at the store location, call us and we will bring your order out to verify your ID, place in your vehicle and you're ready to go!
    2. Pick up In Store: Come into the store, show your ID, and pick up your order.

How does it work?

After you place your order online, the selected store receives your order. Then the merchandise is selected from the store's current inventory and prepared for pick up. If the items are located at another store, there may be a longer wait time as we need to transfer it to the pickup location of your choice. This is all part of our free service. We'll contact you when it's ready and notify you if anything changes. Once your order is ready, you can choose to come into the store to pick up your order OR call us when you arrive and we will provide Contactless Curbside Pickup at your vehicle.

Most orders are ready within 24 hours; however, please allow for extra processing time depending on the item, size of order, and store location. If you need to pick up your order sooner, please give us a call at either location.

See our full Shipping Policy for further details.

Local delivery to your doorstep

Bananas is here to help you support your local economy, shop local, get your musical dreams faster.

FAST: Get Same Day Delivery starting at $35*.

Making your online shopping a little easier. We offer an easy “Order Online, Deliver to your Doorstep”.

This service is currently available for these towns within California: San Rafael, San Anselmo, Fairfax, Larkspur, Greenbrae, Corte Madera, Novato, Sausalito, Belvedere/Tiburon, Ross, Kentfield, and Mill Valley. Shipping rates are shown at checkout. Got questions?... Contact us!

*Get same day delivery for in-stock orders received and processed by 2pm, otherwise will deliver the following business day. Delivery fee is based on weight, delivery location and courier fees. Any amounts over $35 - You will be notified to approve before delivery. This is a convenience option only. Deliveries are by a 3rd party delivery service and will deliver to doorstep only. By accepting this delivery process you hereby indemnify Bananas At Large Inc of all responsibility as Bananas At Large is not the delivery agent and assumes no liability on lost or stolen products.

By choosing this option you understand and agree to the following terms:

  • Some restrictions apply. For in-stock & available items only.
  • You are requesting Bananas at Large to contract on your behalf with a 3rd party service.
  • Bananas At Large guarantees the product to be delivered to your doorstep, with photo proof of delivery.
  • Bananas cannot and is not responsible for the package safety or security once it is delivered to your doorstep.
  • You understand and accept the risk and responsibility of your package once it is delivered.
  • Large items, overweight items may incur additional charges.
  • Certain delivery zones and homes with access issues may incur additional charges or may not qualify for delivery.
  • If the last inventory unit is located at our Santa Rosa store location, there may be a delivery delay that may take an additional business day to have it transferred down to our San Rafael

FREE: Free Local Delivery in 1-3 Days.

Free 1-3 day local delivery available for orders over $199*. Contact us for details.

If you aren’t in a rush to receive your items and want free delivery, choose the Free Local Delivery option at checkout. Your order will be processed and delivered within 2-3 business days. 

*Applies to full price items only. Can't be combined with any other deals or promotions including Bananas Rewards.

This service is currently available for these towns within California: San Rafael, San Anselmo, Fairfax, Larkspur, Greenbrae, Corte Madera, Novato, Sausalito, Belvedere/Tiburon, Ross, Kentfield, and Mill Valley. Shipping rates are shown at checkout. Got questions?... Contact us!

By choosing this option you understand and agree to the following terms:

  • Some restrictions apply. For in-stock & available items only.
  • You are requesting Bananas at Large to contract on your behalf with a 3rd party service.
  • Bananas At Large guarantees the product to be delivered to your doorstep, with photo proof of delivery.
  • Bananas cannot and is not responsible for the package safety or security once it is delivered to your doorstep.
  • You understand and accept the risk and responsibility of your package once it is delivered.
  • Large items, overweight items may incur additional charges.
  • Certain delivery zones and homes with access issues may incur additional charges or may not qualify for delivery.
  • If the last inventory unit is located at our Santa Rosa store location, there may be a delivery delay that may take an additional business day to have it transferred down to our San Rafael

See our full Shipping Policy for further details.

    Local pickup only

    Some products are available for local pickup only. If you’d like this item shipped, please call us at 1 (888) 900-1959 or text us at (415) 457-7600 to discuss shipping options. 

    Shipping items with tubes

    Bananas does not warranty tubes in transit. We offer tube removal and individual bubble wrap service for $45 per customer request (for standard amps, more complex amps that take more time may be a higher fee). Customers buying any tube product and having it shipped should understand and realize that Bananas cannot be responsible for damaged tubes from transit. This applies to all new and used products. Certain manufactures offer a tube warranty on their new products as a courtesy, and that is available thru the manufacturer warranty process for all new products where it applies.

    Play now... Pay later!

    Make music more affordable with these easy payment plans. It only takes a few minutes to apply or just choose the payment option at checkout.

    Bananas at Large offers these online and in-store financing options: Affirm, PayTomorrow, ZIP, Acima Credit, Synchrony and more! 

    Click here for details.

    Bananas Product & Shipping Protection

    Enjoy Peace of Mind 

    Hassle-free product & shipping protection for the stuff you love. 

    Bananas.comExtend Warranty

    Extend™ coverage & benefits 

    • Accidental damage protection: You’re covered for a repair or replacement in case of accidental damage, as well as extended product protection after the manufacturer warranty expires. 
    • Extended product protection: Play without worry. You’re covered when regular use of your product over time results in mechanical or electrical failure. 
    • Worry-free shipping protection: Cover your package against loss, damage, and theft, so if your delivery doesn’t arrive safely, Extend will handle it. 
    • Convenient support: With Extend, you’ll never have a deductible or fees. Simply file a claim with your email address or Extend contract ID (most claims are resolved in minutes). Extend is always happy to help and has online support 24/7. 

    Hear it from our happy customers

    “The plan is definitely worth the price and great customer service!” - Colleen K. 

    “The replacement process was automated and even easier than I could have imagined. I am glad I purchased the extra protection.” - Michael S. 

    “I am beyond happy with my experience with Extend. I can't believe how easy it was for me to get a replacement. Truly amazing!” - Christopher K. 

    Limitations and exclusions apply. Read Extend’s product protection terms and conditions and Extend’s Shoppers Guide to Shipping Protection for more information. 

    Our manufacturer’s warranty 

    Every new product you purchase with Bananas comes with its full manufactures warranty coverage. 

    Why add Extend? 

    Extend provides affordable product and shipping protection with a modern, easy-to understand process. Add an Extend plan and shipping protection to your purchase during checkout.

    Extend Product Protection provides coverage for your product after the manufacturer’s warranty expires. 

    Extend Shipping Protection protects your package en route; whether it’s a mixup on the truck, a mishandling from a shipping carrier, or it's stolen while you’re at work, you’re covered. 

    Easy claims, great service 

    Filing a claim with Extend is simple. Contact Extend online or by phone at (877) 248-7707. They’ll process your claim in minutes and once approved, send you details on your repair or replacement depending on the claim. 

    Start a claim

    What if I need to return my product? 

    If you return your product, Bananas returns the money you paid for the product protection plan. Depending on how much time has passed since your purchase, Extend may issue a prorated refund. 

    Shipping protection is non-refundable. 

    Am I able to cancel my Extend protection plan? 

    Yes. If you decide you do not want to continue with the Extend Product Protection plan, you can cancel for a full refund within the original manufacturer's warranty period. Product protection plans can also be canceled after the Extend protection plan has started. Depending on how much time has passed since your purchase, Extend may issue a prorated refund. 

    Shipping protection is non-refundable.

     

    Warning: Some of the products purchased at Bananas At Large can expose you to chemicals, which are known to the State of California to cause cancer and/or reproductive harm. For more information go to http://www.P65Warnings.ca.gov.